登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 理工学类 > 工程力学 > 正文

交通运输学校图书馆建筑结构设计毕业论文

 2021-03-31 08:03  

摘 要

图书馆是大学的重要组成部分,学生可以在图书馆那知识的海洋里恣意徜徉,在知识的天堂里享受大学的美好时光。因此图书馆的建筑结构设计显得格外重要。

本次设计是,首先根据凝,然后初步估算梁、柱截面尺寸。确定。确定竖向荷载下的框架受荷时,楼板选用现浇双向板结构。之后是确定风作用.

在内力计算中,恒载和风载我选择手算,活载和水平地震荷载我是使用结构力学求解器计算的。在进行内力组合前,由于钢混结构,所以对作用下的。内力组合我考虑了可变荷载、永久荷载和地震作用三种情形来进行组合。完成荷载的统计和内力的分析后,是开始截面的设计和配筋的计算。

最后,完成设计计算书,根据配筋的结果,利用AUTOCAD等软件绘制配筋图包括基础配筋图、梁柱配筋图、楼面板配筋图和楼梯配筋图以及建筑施工图。

关键词:图书馆;。

Abstract

The library is an important part of the University. Students can wander about in the ocean of knowledge in the library and enjoy the good time of the University in the paradise of knowledge. Therefore, the architectural design of the library is particularly important.

The design of the project for the Wuhan City, the construction of the library building design. First of all, according to the design data, the cast-in-place reinforced concrete frame structure with higher practicability and economy and the initial value of the beam and column section size are selected. Determine the calculation sketch and load statistics. When the frame under vertical load is loaded, the slab is chosen as the cast-in-place two-way slab structure. Determine the standard value of wind load and horizontal seismic action, and use the improved bending point method, that is, D method to calculate the column lateral displacement stiffness, and then use the displacement stiffness to check the displacement under wind load.

In the calculation of internal forces, I choose the hand load and the wind load. The live load and the horizontal earthquake load are calculated by the solver of structural mechanics. Before the internal forces are combined, the steel-concrete composite structure has a plastic redistribution property, so the bending moment at the end of the beam under the vertical load is amplitude modulated. The combination of internal forces takes into account three cases of variable load, permanent load and seismic action. After loading statistics and internal force analysis, the section design and reinforcement calculation are started.

Finally, complete the structural design and calculation, according to the results of reinforcement, reinforcement drawing drawing including foundation reinforcement drawing, Liang Zhu reinforcement plans, floor reinforcement plans and stairs reinforcement plans and construction plans by AUTOCAD.

Key words: library; internal force combination; reinforcement; load.

目录

第1章 绪论 1

第2章 荷载统计及其框架内力分析 2

2.1 设计资料 2

2.2 结构选型及估计梁柱截面尺寸 3

2.3 确定计算简图 4

2.4 统计荷载 6

2.4.1 荷载标准值 6

2.4.2 活载标准值 7

2.5 竖向荷载下框架受荷总图 7

2.6 风荷载标准值计算 12

2.6.1 柱抗侧移刚度 D 的计算 13

2.6.2 风荷载作用下的位移验算 14

2.7 水平地震作用 14

2.8 内力计算 17

2.8.1 恒载标准值作用下的内力计算 17

恒载内力计算采用分层法。 17

2.8.2 横向风荷载作用下的框架内力计算 27

2.8.3 活载标准值作用下的框架内力计算 33

2.8.4 水平地震作用下的框架内力计算 35

2.9 内力组合 39

2.9.1 竖向荷载作用下的梁端弯矩调幅计算 39

2.9.2 控制处的内力值计算 40

2.9.3 内力组合 40

第3章 截面设计与配筋计算 50

3.1 梁柱截面设计 50

3.1.1 框架柱截面设计 50

3.1.2 框架梁截面设计 56

3.2 楼面板设计 58

3.2.1 荷载统计 58

3.2.2 配筋计算 59

3.3 楼梯设计 61

3.3.1 踏步板 61

3.3.2 斜梁 62

3.3.3 平台板计算 63

3.3.4 平台梁计算 64

3.4 基础设计 67

3.4.1 作用在基础的顶面上荷载计算 67

3.4.2 基础底面的尺寸及埋深 69

3.4.3 基础的高度验算 69

3.4.4 基础的底板配筋 71

第4章 结束语 73

参考文献 74

致谢 75

第1章 绪论

随着时代的发展,学校对的要求越来越高。图书馆是一所,也是现代教育重要的。图书馆建筑是收集、整理、收藏图书资料供人阅览的地方,,又具有人性化是其。

在结构上,一般采用通用的原则,即“”的模式设计。“”的结构设计,有利于的布设和使用功能的。高校的图书馆:建筑、建筑、智能化内容。

作为我国主要的建筑类型,,节省材料有可以较灵活地配合的优点,利于安排需要的建筑结构;但应力集中显著,作为本设计中5层图书馆设计也比较合适。采用现浇时,结构的刚度、,也能达到较好的抗震效果。

通过这次毕业设计,我复习了大学四年来学的基础科目,对于建筑结构设计有了更深的认识,也学会了查规范和资料,对于规范也有了更深刻的认识。学会使用AUTOCAD和《结构力学求解器》等软件,对于以后将有很大帮助。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图