登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 环境科学与工程类 > 环境科学 > 正文

F市日处理2000吨生活垃圾卫生填埋场的初步设计毕业论文

 2021-04-08 11:04  

摘 要

本设计是针对垃圾无害化处理和处置而进行的设计。城市垃圾虽然是污染源,但作为另外一种物质形态来说,城市垃圾又可以作为一种可以利用的资源,而且是唯一会随经济增长而不断增加的资源。目前共存在焚烧,卫生填埋和堆肥三种垃圾处理的主要方式。其中卫生填埋是世界各国首选的垃圾处理的方式。本设计为城市生活垃圾卫生填埋场的初步设计。

本设计的意义为使生活垃圾处理系统良性运转于城市发展的各个阶段。保护城市环境,促进经济循环可持续发展,同时也保护人类健康。

本设计根据F市自然地理和经济情况来考虑,最终选择卫生填埋法处理该市垃圾。选择进行分区建设,来解决垃圾量大。并通过预测未来的垃圾量计算要求的场地。随着垃圾填埋时间的增长,会产生一定量的渗滤液和填埋气体,因此需要建设相应的防渗工程和导排系统阻止污染物对周围环境的污染,并对这些污染物进行处理与利用。其处理流程为:生活垃圾→计量→卸料→推铺→压实→覆土→灭虫→终场生态恢复;渗滤液→调节池→厌氧→SBR系统→混凝→污水厂。

卫生填埋场分三期建设,近期规模为2400t/d,中期规模为4200t/d,远期规模为6300t/d。

关键词:卫生填埋场;水平防渗;渗滤液处理;填埋气体导排和利用。

ABSTRACT

This design is designed for the harmless treatment and disposal of garbage. Although urban waste is a source of pollution, as another form of matter, urban waste can be used as a resource that can be utilized, and it is the only resource that will increase with economic growth. At present, there are three main methods of incineration, sanitary landfill and composting. Among them, sanitary landfill is the preferred method of garbage disposal in countries all over the world. This design is the preliminary design of the municipal solid waste sanitary landfill.

The significance of this design is to make the domestic waste treatment system work in all stages of urban development. Protect the urban environment, promote sustainable economic development, and protect human health.

The design is based on the natural geography and economic situation of F City, and finally chooses the sanitary landfill method to treat the city's garbage. Choose to build the partition to solve the problem of large amount of garbage. And calculate the required site by predicting the amount of garbage in the future. As landfill time increases, a certain amount of leachate and landfill gas will be produced. Therefore, it is necessary to construct corresponding anti-seepage projects and drainage systems to prevent pollutants from polluting the surrounding environment and to treat these pollutants. use. The treatment process is: domestic garbage → metering → unloading → pushing → compaction → covering soil → pest control → final ecological restoration; leachate → regulating pool → anaerobic → SBR system → coagulation → sewage plant.

The sanitary landfill is constructed in three phases. The recent scale is 2400t/d, the medium-term scale is 4200t/d, and the long-term scale is 6300t/d.

目 录

1、概述 1

1.1设计任务及目的 1

1.2 设计原则与范围 1

1.2.1编制原则 1

1.2.2处理方案选择原则 1

1.3 设计依据 1

1.4 规范和标准 1

2、工程基础资料 2

2.1设计背景资料 2

2.2项目组成 2

2.3 S市环境卫生现状和规划 3

2.3.1S市环境卫生现状 3

2.3.2S市环境卫生规划简述 3

2.4垃圾处理方式选择 3

2.4.1我国目前城市生活垃圾处理技术 3

2.4.2处理方法的选择 4

2.5填埋作业流程 6

2.6卫生填埋工艺设备 7

3、工艺设计计算 7

3.1垃圾量预测 7

3.1.1填埋容积预测 7

3.1.2总库容 9

3.1.3垃圾坝高度的确定 9

3.1.4填埋场库容设计计算 9

3.2总平面布置 10

3.2.1填埋场的选址原则 10

3.2.2总平面及功能分区 10

3.2.3平面布置  11

3.2.4 竖向设计  11

3.2.5厂区道路  11

3.2.6  出入口及围墙  11

3.2.7道路组织与运输  11

3.2.8 场内道路交通  11

3.2.9 绿化  11

3.2.10场地平整 11

3.2.11 垃圾坝 12

4、防渗导气系统 12

4.1防渗系统 12

4.1.1填埋场防渗目的 12

4.1.2防渗标准 12

4.1.3防渗材料[11] 12

4.1.4防渗方式[11] 13

4.2渗滤液收集系统及调节池 15

4.2.1 导流层 15

4.2.2导流沟与导流管 15

4.2.3提升系统 15

5、渗滤液相关设计计算 16

5.1渗滤液定义及产生量 16

5.1.1垃圾渗滤液概念和来源[10] 16

5.1.2 渗滤液特点[11] 17

5.1.3垃圾渗滤液产生量[10] 17

5.1.4渗滤液调节池设计[10] 18

5.1.5渗沥液集、排设施设计 18

5.1.6渗沥液集液池 19

5.1.7设计水质[8] 19

5.2垃圾渗滤液处理工艺 19

5.2.1渗滤液与城市污水的合并处理[11] 19

5.2.2 渗滤液的单独处理[11] 19

5.2.3工艺设计 20

6、填埋气体相关设计计算 20

6.1 填埋气体的影响 20

6.1.1填埋气体的产生及主要组成 20

6.1.2爆炸与火灾 20

6.1.3对水环境的影响 21

6.1.4对大气环境的影响 21

6.2填埋气体的收集 21

6.2.1集气系统[8] 21

6.2.2输送系统[8] 21

6.3冷凝收集和排放 21

6.3.1过滤杂质 21

6.3.2脱水 22

6.3.3加压 22

6.4气体输送系统 22

6.5填埋气产生量估算[11] 22

6.6填埋气体发电工艺[8] 22

7、封场设计 23

7.1堆体整形改造工程 23

7.2封顶覆盖层工程 24

7.3场地覆绿工程 24

7.4终场处理标准 24

7.5封场技术要求 24

7.6 封场工程设计 25

8、防洪系统 26

8.1 设计依据 26

8.2 防洪标准 26

8.3 防洪工程设计(截洪沟) 26

9、环境保护与环境监测 26

9.1环境保护设计依据 26

9.2设计执行的环保标准 26

9.3主要污染物和主要污染源 26

9.3.1水污染 27

9.3.2大气污染 27

9.3.3土壤污染 27

9.4环境保护措施 27

9.4.1填埋场场底防渗。 27

9.4.2渗滤液的收集处理。 27

9.4.3填埋气的回收利用。 27

9.4.4土壤污染的防治。 27

9.4.5安全措施 28

9.5环境监测 28

9.5.1 地下水环境监测 28

9.5.2 大气监测 28

9.5.3 噪声监测 29

9.5.4 沼气监测[14] 29

9.5.5 污水监测 29

参考文献 30

绪论

1.1设计任务

完成F市2000吨生活垃圾卫生填埋场填埋工艺设计。

1.2 设计原则

1.2.1编制原则

在处理城市生活垃圾时,应遵循城市国家垃圾处理技术政策和总体规划指南,合理选择场地和处理方法、严格控制二次污染,使工程指标符合国家有关标准和规定。综上所述,本项目有以下的编制原则:

1)根据国家城市垃圾处理立法和各种技能标准,根据当地环境卫生行业的发展情况, 进行科学规划对于生活垃圾产生状况,然后对建设规模做出合理的判断,再进行安全处理生活垃圾,因此,它可以真正实现减少废物,资源利用和无害化的总体政策。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图